DryCross — Custom Versatile Waterproof Bags
Updated 2026-10-17
https://drycross.com/custom-versatile-waterproof-bags

DC-VERS-01 — 90L Wheeled Waterproof Duffel Backpack
https://drycross.com/product-90l-wheeled-waterproof-duffel-backpack
A large red wheeled duffel that brings trolley, backpack and hand-carry arrangements into one equipment bag. The supplied reference lists a nominal 90 L size, 75 × 38 × 40 cm external dimensions and approximately 5.3 kg, with a telescopic handle, two wheels and external zip pockets.

Model reference: DC-VERS-01
Product family: Custom Versatile Waterproof Bags / multi-purpose outdoor equipment carriers
Material reference: Coated outer fabric shown; exact shell, backing and lining composition to confirm
Size reference: Nominal 90 L reference; illustrated exterior 75 × 38 × 40 cm; approximately 5.3 kg listed
Carry modes: Trolley pull handle, backpack straps and hand-carry webbing reference
Wheel / base layout: Two wheels with lower-corner mounts and underside rails
Weight reference: Approximately 5.3 kg in the source illustration; verify production unit
Exterior organization: Multiple zip pockets, webbing runs and buckle fittings
Water resistance: No finished-model immersion rating supplied. Agree construction and testing for the intended use.
Custom order: Logo, colour, materials, lining, pockets and carrying details subject to feasibility and sample approval.
Commercial terms: MOQ, sample charge, price and lead time confirmed against the approved specification.

Exterior dimensions: approximately 75 × 38 × 40 cm. Bag weight reference: approximately 5.3 kg. Packing will protect the wheels, telescopic handle and strap fittings. Tell us your required quantity, packing preferences and delivery address. We will calculate the carton details and shipping cost for your order.

Q: Can this wheeled duffel be carried as a backpack?
A: The supplied rear view shows a shoulder-strap arrangement. Confirm strap adjustment, stowage, frame contact and loaded comfort on the approved sample. A photograph does not establish a carrying-load rating.

Q: Is the 90 L volume a verified usable capacity?
A: It is a nominal source reference. The illustration gives 75 × 38 × 40 cm outside dimensions and approximately 5.3 kg. Check internal packing clearance around the frame, lining and closure before confirming usable volume.

Q: Does this bag meet airline carry-on requirements?
A: Do not assume so. The illustrated external dimensions are 75 × 38 × 40 cm. Compare the finished packed dimensions and weight with the specific carrier and baggage allowance before travel.

Q: Can I add my logo or change carrying details?
A: For a custom versatile waterproof bag based on DC-VERS-01, start with the trolley / backpack / hand carry layout. Send your equipment dimensions, target load, preferred material and finish, logo artwork, quantities by colour and destination. DryCross can review feasible changes to pockets, straps, lining, hardware and branding before confirming sample terms, MOQ, price and delivery timing. Confirm the required water-resistance level, artwork compatibility and loaded handling on the approved construction.

Q: What water-resistance claims can I make for this versatile bag?
A: Agree the exact shell, seams, closure and pocket construction, then confirm the test scope for the finished sample. Material appearance does not establish an immersion rating. Review protection in the actual packed and closed configuration.

Q: What should I confirm before a wholesale order?
A: Exterior dimensions: approximately 75 × 38 × 40 cm. Bag weight reference: approximately 5.3 kg. Packing will protect the wheels, telescopic handle and strap fittings. Tell us your required quantity, packing preferences and delivery address. We will calculate the carton details and shipping cost for your order. Approve the final construction, included accessories, artwork, quantities and commercial terms before production.

DC-VERS-02 — Long Fin Gear Bag with Drainage Eyelets
https://drycross.com/product-long-fin-waterproof-gear-bag
A long, carbon-textured fin bag for freediving, pool training and equipment travel. The reference combines a lengthwise main opening, two front zip pockets, a moulded carry grip and a clip-on padded shoulder strap. Drainage eyelets help distinguish this wet-gear carrier from a sealed dry bag.

Model reference: DC-VERS-02
Product family: Custom Versatile Waterproof Bags / multi-purpose outdoor equipment carriers
Material reference: Carbon-textured coated finish; the source uses a carbon-fibre material label without a composition report. Confirm substrate and coating
Size reference: Illustrated exterior 106 × 23 × 12 cm; usable fin clearance to confirm
Reference weight: 1,036.7 g listed on the size sheet; confirm finished net weight
Closure / pockets: Lengthwise main zip and two exterior zip pockets
Drainage: Screened drainage / ventilation eyelets shown
Carrying: Moulded hand grip and detachable padded shoulder strap
Accessories: Example fins, masks and other diving equipment are not included
Water resistance: No finished-model immersion rating supplied. Agree construction and testing for the intended use.
Custom order: Logo, colour, materials, lining, pockets and carrying details subject to feasibility and sample approval.
Commercial terms: MOQ, sample charge, price and lead time confirmed against the approved specification.

Exterior dimensions: approximately 106 × 23 × 12 cm. Product weight reference: approximately 1.04 kg. Please specify the required shoulder strap and accessories for packing. Tell us your required quantity, packing preferences and delivery address. We will calculate the carton details and shipping cost for your order.

Q: Will this bag fit all freediving fins?
A: No universal fit is established. The source illustrates 106 × 23 × 12 cm outside dimensions. Measure your complete fins and confirm the usable internal length, width, opening and any protective sleeves on a sample.

Q: Do the drainage holes mean the bag is not a sealed dry bag?
A: Yes. The visible drainage eyelets allow water or air movement. Use this model for equipment transport and drainage, not airtight protection of electronics or items that must stay completely dry.

Q: Is the material structural carbon fibre?
A: The references use a carbon-fibre label and show a carbon-textured finish, but no fibre-content or construction report is supplied. Confirm the actual coated-fabric substrate and finish before specifying composition.

Q: Can I add my logo or change carrying details?
A: For a custom versatile waterproof bag based on DC-VERS-02, start with the long equipment / drainage / shoulder carry layout. Send your equipment dimensions, target load, preferred material and finish, logo artwork, quantities by colour and destination. DryCross can review feasible changes to pockets, straps, lining, hardware and branding before confirming sample terms, MOQ, price and delivery timing. Confirm the required water-resistance level, artwork compatibility and loaded handling on the approved construction.

Q: What water-resistance claims can I make for this versatile bag?
A: Agree the exact shell, seams, closure and pocket construction, then confirm the test scope for the finished sample. Material appearance does not establish an immersion rating. This fin bag has deliberate drainage eyelets and is not airtight dry storage.

Q: What should I confirm before a wholesale order?
A: Exterior dimensions: approximately 106 × 23 × 12 cm. Product weight reference: approximately 1.04 kg. Please specify the required shoulder strap and accessories for packing. Tell us your required quantity, packing preferences and delivery address. We will calculate the carton details and shipping cost for your order. Approve the final construction, included accessories, artwork, quantities and commercial terms before production.

DC-VERS-03 — Carbon-Textured Roll-Top Skateboard Backpack
https://drycross.com/product-carbon-textured-roll-top-skateboard-backpack
A long roll-top skateboard backpack with front zip storage, a side carry handle and adjustable padded shoulder straps. The saved product listing specifies 500D PVC, while the catalogue distinguishes carbon-textured and smooth colour references for a clean outdoor commuting range.

Model reference: DC-VERS-03
Product family: Custom Versatile Waterproof Bags / multi-purpose outdoor equipment carriers
Material reference: 500D PVC in the saved listing; carbon-textured or smooth finish references by colour
Size reference: Flat reference 115 × 32.5 cm; listed use-size 103 × 32.5 cm. These are two-dimensional references, not a usable internal fit guarantee
Closure: Roll / fold mouth with buckle reference
Carry arrangement: Padded adjustable shoulder straps and side handle
Storage: Long main body with exterior zip-access storage
Colour references: Sky blue, pink, dark blue and dark green pictured; catalogue also lists black and white
Water resistance: No finished-model immersion rating supplied. Agree construction and testing for the intended use.
Custom order: Logo, colour, materials, lining, pockets and carrying details subject to feasibility and sample approval.
Commercial terms: MOQ, sample charge, price and lead time confirmed against the approved specification.

Flat dimensions: approximately 115 × 32.5 cm. Rolled-use size reference: approximately 103 × 32.5 cm. Tell us your required quantity, packing preferences and delivery address. We will calculate the carton details and shipping cost for your order.

Q: Will this roll-top bag fit any skateboard or longboard?
A: No universal fit is established. The listing gives 115 × 32.5 cm flat and 103 × 32.5 cm use-size references. Check the complete board, trucks and wheels against usable internal dimensions and roll allowance on a sample.

Q: Is this a carbon-fibre composite backpack?
A: No composite construction is established. The saved listing specifies 500D PVC, and the catalogue uses carbon-texture wording. Approve the actual material swatch, coating and finish for the selected colour.

Q: How can I request packing and shipping details?
A: Flat dimensions: approximately 115 × 32.5 cm. Rolled-use size reference: approximately 103 × 32.5 cm. Tell us your required quantity, packing preferences and delivery address. We will calculate the carton details and shipping cost for your order.

Q: Can I add my logo or change carrying details?
A: For a custom versatile waterproof bag based on DC-VERS-03, start with the roll top / 500d pvc / long body layout. Send your equipment dimensions, target load, preferred material and finish, logo artwork, quantities by colour and destination. DryCross can review feasible changes to pockets, straps, lining, hardware and branding before confirming sample terms, MOQ, price and delivery timing. Confirm the required water-resistance level, artwork compatibility and loaded handling on the approved construction.

Q: What water-resistance claims can I make for this versatile bag?
A: Agree the exact shell, seams, closure and pocket construction, then confirm the test scope for the finished sample. Material appearance does not establish an immersion rating. Review protection in the actual packed and closed configuration.

Q: What should I confirm before a wholesale order?
A: Flat dimensions: approximately 115 × 32.5 cm. Rolled-use size reference: approximately 103 × 32.5 cm. Tell us your required quantity, packing preferences and delivery address. We will calculate the carton details and shipping cost for your order. Approve the final construction, included accessories, artwork, quantities and commercial terms before production.

Specification review: michael@drycross.com | https://drycross.com/contact